Under Cabinet Wine Glass Rack Mounting Instructions

Under Cabinet - Counter - Shelf Glass Rack Mounting Instructions

Simply screw the provided screws through the unit
(at the pilot holes) and secure to your mounting surface.
Please check your screw size depth to ensure the provided screws will not go
all the way through your mounting surface.
Also, don't use a power drill or screw gun, unless you know how to set the
clutch so that the screws won't go in too tight and split the support rails.
Note: We'll usually supply you with two different sizes of screws (3/4 and 1 inch screws),
to ensure you can a get a good bite into your mounting surface.

Tap Or Click On The Picture To Enlarge

Please Click Or Tap Here
To See Spacer Mount Glass Rack Installation Instructions!

Note: If you are mounting at an area that is
particle board instead of real wood or MDF.
Please see an article I wrote at my blog
about how to deal with those types of mounting surfaces.

---

The wood screws we supply you for mounting are designed for use in wood and wood composites.
Called 'super sinkers', these screws have a flat head and deep,
wide-spaced angled threads to drive in easily and hold tight.